4 Top Exterior Painting Tips – A Guide

painting walls and fenceHow can I get the best possible result while painting my exterior walls, fences and gates?

Your outside walls will look great when we’re done with them. Even though painting the outside of your house might be an intimidating task, we’ve got you covered with our comprehensive preparation guide.

Soon, the temperature will rise, and the rain should stop. Painting the outside walls and woodwork of your home will soon be a great idea. Your masonry takes a beating from the weather year-round, but with little preventative maintenance, you can keep your building’s outside looking great for decades. To paint your external walls like an expert, follow these steps.

How can I get the right external wall finish?

There is no doubt that painting the outside of a home is a massive undertaking. Make sure it’s a huge task, and that it’s done well. And these exterior home painting suggestions are brought to you by Dr. Dulux.

It is important to deduct the width and height of the windows and doors from the overall width and height of the home to arrive at an appropriate final figure for the amount of paint you will require. It all depends on the specific product you’re using.

The normal coverage of All Weather Smooth Masonry paint is 15m2/L, whereas the coverage of All Weather Textured Masonry paint is just 9m2/L. Coverage is 12m2/L with 12 coats of Ultimate Protection Smooth Masonry paint.

The Number One Piece of Advice: Clean the Walls

Wall cleaning is a crucial initial step that should not be neglected. Keep your walls clean and clear of clutter and marks. The use of Fungicidal Wash is also suggested for areas with mold or algae growth. The next step is to wash the whole surface to get rid of any surface debris and loose or peeling paint. If you want your wall’s finish to endure for years, you should rinse it with clean water afterward.

The Ideal Conclusion Wall Washing Tip Number Two: Patch and Prime

Once the surface has been thoroughly cleaned, any imperfections in the render may be filled up using Polycell Multi Purpose Polyfilla for a professional finish. A smart exterior house painting tip is to begin with a layer of Stabilising Primer, however this varies depending on the substance of your walls. This will ensure that your initial layer of paint sticks to the walls, which is particularly crucial for glossy or porous surfaces. This water-based primer will secure any weak spots in your brick surface, whether it be powdery or chalky after you’ve prepared it. Use a brush or roller to apply, and you’ll be set to go. It’s also practical since you may use it on the walls inside your home.

Tip 3: Select a weatherproof paint for the perfect finish repair primer

You’re all set to create some art. Applying Masonry Paints helps prevent mould and algae development and weather damage to your walls and curb appeal. They have anti-fade construction for consistent hue retention. Even while two coats should be plenty, a third can be necessary if you’re covering a dark colour.

Remember that a rough surface might need twice as much paint. If you choose textured masonry paint specifically formulated for your surface, you may cut down on the number of applications you apply. You can get uniform coverage for irregular surfaces by using a paint with a textured surface and a colour-mixing texture. When painting a flat surface, choose Smooth Masonry paint, which offers a 15-year warranty against the elements.

Keep in mind that Masonry paints are guaranteed by the Promise, which states that if you see any peeling, flaking, or mould development within the paint layer at any point during your occupancy, we will refund your purchase price in full.

Protective Paint That Gives a Beautiful Finish

So, there you have it: the best advice we can provide you on painting the outside of your home. However, if you’re stuck for ideas for a colour scheme, we’ve also included a brief primer on colour theory.

Two coats of paint are generally sufficient for painting new walls. However, keep in mind that if you need to make repairs, those spots will likely need an extra coat to provide a perfect, smooth finish. It was Matt Gray who said that.

“I need to paint the external wood trim but I don’t know how to prepare it?”

Now that you know how to get professional results while painting masonry, let’s move on to the outside woodwork. Here are the three simple actions that we recommend you take to accomplish your goal.

In order to prevent your trim from becoming stained or rotten, step one is to prime it with exterior preservative primer if it is brand new or bare. Doors that have previously been painted should have any peeling or flaking paint stripped away and the surface sanded down to bare wood. Fill any gaps or holes with Polycell/Polyfilla before painting for a professional look.

You should prepare the surface before applying a new paint colour if the new colour is much darker or lighter than the old one.

To prevent cracking in step two, apply as many as two coats of Exterior Quick Dry Undercoat for wood and metal. Applying it to metal? To prevent rusting, a metal primer should be applied first.

Paint is ready to be applied in Step 3. When applied in two coats, both High Gloss and Quick Dry Stain Paint for wood and metal provide a weatherproof, mould-resistant, and flexible paint film that keeps surfaces from cracking and stains to a minimum.

As a result, you now have our professional advice on painting the outside of your house and other wood surfaces. You can do this monumental task!